Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Use acrylic to make this extraordinary Christmas tree. (To browse full materials range, please visit www.engraving-supplies.ca)
You can also use machines from the SP series. If you are using other machines from the Speedy series, please adjust the cutting file according to the table size.
Use the acrylic grid cutting table for perfect cutting results on acrylic.
Import our design template into your graphic program or make your own design. Then send your design to the laser.
process mode | resolution | cut line |
---|---|---|
Standard | 500 dpi | none |
halftone | others |
---|---|
color | enhanced geometries inner geometries first |
Laser cutting TroGlass acrylic creates elegant, polished edges. Position the acrylic sheet into your laser and cover the rest of the table to maximize the exhaust power. Remove the protective foil after the laser process.
colour | process | power (%) | speed (%) | ppi/HZ |
---|---|---|---|---|
red | cutting CO2 | 30 | 0.2 | 5000 |
passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | 0 | - |
To assemble the Christmas tree, thread the bands through the single rings starting with the smallest one.
Fasten the rings with knots or use super glue to hold them in position. In our sample we used a distance of 10-12 inches between the rings.
Now let your creativity flow and decorate the acrylic tree with any items you like.
Do not use candles with real flames for this acrylic tree. Use electrical candles or light chains to illuminate the tree.