See our lasers in action!
Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Available for:
SpeedMarker Series
ProMarker Series
With the height adjustment, you adjust your marking laser to different workpiece heights. Laser focusing will thus be successful for any application.
The standard (and optional) z-axis is different, depending on the laser system:
Laser system | standard z-axis | optional z-axis |
---|---|---|
SpeedMarker 100 | electrical z-axis | - |
SpeedMarker 300 | mechanical z-axis with crank | software-controlled z-axis |
SpeedMarker 700 | electrical z-axis | software-controlled z-axis |
SpeedMarker 1300 | software-controlled z-axis | - |
ProMarker 100 | lifting table | electrical z-axis |
ProMarker 300 | mechanical z-axis with crank | software-controlled z-axis |