Next make the parameter settings. Our suggested parameters vary depending on the laser machine used and the available laser power.
Place the belt on the aluminum grid table in your laser with the belt buckle on the right side. For an optimum engraving result, place the belt parallel to the upper edge at a distance of approx. 1/2 in. Make sure that the leather is straight - the aluminum grid helps with the alignment.
Then cover the remaining working area to create a strong vacuum.
|Color ||Process ||Power (%) ||Speed (%) ||ppi/Hz |
|black ||Engrave CO2 ||50 ||100 ||500dpi |
|red ||Cut CO2 ||75 ||1.0 ||1000 Hz |
|Passes ||Air Assist ||Z-Offset ||Direction ||Advanced ||Path planning |
|1 ||on ||+2 ||Top down ||High quality ||- |
|1 ||on ||-1 ||- ||- ||Accuracy |