Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Create an original bottle display from TroGlass XT. Extruded acrylic has a constant material thickness and is therefore suitable for applications where parts have to be put together.
This sample can be made with the Speedy 300 and Speedy 400 laser engraver with the JobControl® Vision software.
Copyright notice: This template may not be used for products for resale or other distribution. If you intend to do so, you must purchase your own iStock license "Pineapple" and "Pineapple pieces". We assume no liability for illegal actions.
Import our template and adapt it to your requirements. We print the design to the back of the acrylic with an UV-printer. With the registration marks the JobControl Vision camera system will recognize the position and cut precisely along the contour.
Import our template and adapt it to your requirements. Before drawing the final connections measure the kerf. For this make a test cut with a suitable parameter and lens. TroGlass XT comes with a consistent material thickness. Hence you can transfer the testing results to all future designs when using the same laser settings.
Send the job to the laser using the driver settings below.
Process mode | Resolution | Cut line |
---|---|---|
Vector Job | 500dpi | none |
Halftone | Others |
---|---|
- | Optimized Geometries, inner geometries first |
The laser parameters may vary depending on the type of laser machine and available laser power.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
red | Cut CO2 | 70 | 0,4 | 15.000 |
Passes | Air Assist | z-Offset | Direction | Advanced |
---|---|---|---|---|
1 | ON | - | - | - |
TroGlass XT is that product, that all model makers, interior and exterior designers, and signage and display manufacturers are waiting for.
It's a transparent, extruded acrylic glass with fantastic light transmission, excellent resistance to outdoor weathering, and low thickness tolerance.