See our lasers in action!
Laser engraver and cutter
Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
| ⚫ Engrave | ⚫ Cut | ⚫ Mark |
| Laser type: | CO₂, Flexx or Fiber laser |
|---|---|
| Work area: | 610 x 305 up to 1016 x 610 mm |
| Max. workpiece height: | 125 - 305 mm |
| Laser power: | 20 - 120 watts |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Engrave | ⚫ Cut | ⎯ Mark |
| Laser type: | CO₂ laser |
|---|---|
| Work area: | 1245 x 710 up to 2210 x 3210 mm |
| Max. workpiece height: | 50 - 112 mm |
| Laser power: | 40 - 400 watts |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Engrave | ⎯ Cut | ⚫ Mark |
| Laser type: | CO₂ or Fiber laser |
|---|---|
| Max. work area: | 190 x 190 up to 1300 x 450 mm |
| Max. workpiece height: | 250 - 764 mm |
| Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Environmental Responsibility
We are committed to environmental protection. We act responsibly.
The Trodat Group – and therefore Trotec – is setting a good example in the field of climate protection. As early as 1993, at a time when not anyone and everyone was talking about the Kyoto Protocol and the strict Austrian environmental laws had not reached the standard they are at today, the Trodat Group had already started to implement measures to ensure better energy use.
Throughout the entire value-added process, we pay a great deal of attention to the efficient use of energy and the careful handling of raw materials. Our laser technology and the latest filter technology enable us, for example, to offer our customers production systems which protect the environment by avoiding the use of chemicals in the laser engraving, laser cutting or laser marking of materials.
In 2008, we were awarded EN ISO14001:2015 certification
Clean raw materials
- Total avoidance of substances such as zinc, cadmium, lead and PVC
- On-going supplier-screening according to environmental and quality certification
Economic use of energy
- Economic handling of energy and raw materials
- 62 % of the electricity requirement is met using renewable energy
- Reduction of waste
- Packaging recycling
Responsible production
- Implementation of efficient and gentle production processes
- Avoidance of production waste
- The entire production process is completely free from waste water
Less CO2
- Reduction of carbon by switching from fuel oil to natural gas
- Reduction of goods transported by air
Green Building
The Trotec headquarters office building in Austria is self-sustaining in respect to energy needed for heating, cooling and ventilation.