Speedy-serien: CO2-lasergraverer og -skærere af formater op til 1016 x 610 mm
⚫ Graver | ⚫ Skær | ⚫ Mærk |
Lasertype: | CO₂, Flexx eller Fiber laser |
---|---|
Arbejdsområde: | 610 x 305 op til 1016 x 610 mm |
Arbejdsemnets maks. højde: | 125 - 305 mm |
Lasereffekt: | 20 - 120 watt |
SP-serien: CO2-laserskærer til materialer i stort format.
⚫ Graver | ⚫ Skær | ⎯ Mærk |
Lasertype: | CO₂ laser |
---|---|
Arbejdsområde: | 1245 x 710 op til 2210 x 3210 mm |
Arbejdsemnets maks. højde: | 50 - 112 mm |
Lasereffekt: | 40 - 400 watt |
SpeedMarker-serien: Industriel high-speed lasermærkning til mærkning af metaller og plast.
⚫ Graver | ⎯ Skær | ⚫ Mærk |
Lasertype: | CO₂ eller Fiber laser |
---|---|
Maks. arbejdsområde: | 190 x 190 op til 1300 x 450 mm |
Arbejdsemnets maks. højde: | 250 - 764 mm |
Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
When cutting and engraving graphics, the laser first carries out all engravings and then all cuts. Cutting is carried out in the order in which the outlines are drawn. However, this may lead to the external contour being cut first and the workpiece tilting, slipping or even falling through the cutting table. Cutting of the internal contours is then no longer possible.
Conventional methods for ordering cutting lines:
Activating this feature simplifies the working process many times over, because the cutting lines are automatically sorted and the internal cutting lines are cut first. This preset automatically improves the quality of your application, because internal parts remain firmly attached to the actual cut and thus cannot slip. The external contour is automatically cut at the end. In addition, this feature also saves time because the lines do not need to be manually sorted in the graphic.