Уникальная обложка для каталога из бумаги LaserPaper
Посмотрите, как можно изготовить представительные обложки для каталогов, буклетов и прочей печатной продукции из LaserPaper Wood.
Подготовка
Required material
- 1 sheet of LaserPaper Wood maple
- material to cover the engraving table
Machine used
- Speedy 360
- 120 Watt
- 2" lens
- aluminum cutting grid table or honeycomb table
For this sample you can use any laser machine from the Speedy laser engraver series.
Important
- For the inner part, use paper with at least 150 g/m² to secure sufficient volume of the finished item
- Make sure that "Send Beziers and paths to driver" is activated in your software. Otherwise the registration marks are not recognized by JobControl® Vision.
Пошаговые инструкции
Step 1: Make design layout
Make your own design and adapt it to your needs. Print your design on the LaserPaper Wood or forward it to your trusted printer.
Because this sample is being engraved and cut, we put a hair cross in the middle of the print file instead of registration marks. This hair cross helps you to position the job precisely.
Send the graphic for the outer shell to the laser using the settings below:
Print settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
Colors | enhanced geometries, inner geometries first |
Step 2: Laser process
Adjust the parameter settings. The parameters can differ depending on the laser machine used and laser power available.
Tip:
Change the order of the colors in JobControl from red to blue so that the material is scratched first and cut second.
Laser parameters:
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | Engraving CO2 | 20 | 50 | 500 |
red | Engraving CO2 | 12 | 1.5 | 1000 |
blue | Cutting CO2 | 5 | 1.5 | 1000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | +2.5 mm | - |
1 | on | - | - |
1 | on | +2 mm | - |

Step 3: Post-processing
Take the cover out of your laser and insert the core of the catalogue. Or if you are using a commercial printer, forward the cut-out cover to your printing representative to attach it to the catalogue.
Подготовка
Необходимые материалы
- 1 лист LaserPaper Wood (кленовый)
- Материал для покрытия стола для гравировки
Используемый лазерный гравер
- Speedy 360
- 120 Вт
- 2"линза
- Стол-решетка из алюминия или ячеистый стол
Для изготовления обложки можно использовать любой станок лазерной резки серии Speedy.
Важно
- Для внутренней части используйте бумагу плотностью не менее 150 г/м2, чтобы обеспечить достаточный объем готового изделия
- Убедитесь, что функция "Send Beziers and paths to driver" активирована в вашем программном обеспечении. В противном случае регистрационные знаки не распознаются в Job Control° Vision.
Пошаговые инструкции
Шаг 1: подготовка макета
Создайте свой собственный дизайн и адаптируйте его к вашим потребностям. Напечатайте ваш дизайн на LaserPaper Wood или отправьте на ваш принтер.
Используйте следующие настройки:
Настройки печати:
Process mode/Процесс обработки | Resolution/Разрешение | Cut line/Линия реза |
---|---|---|
Standard/Стандартный | 500 dpi | none/нет |
Halftone/Полутона | Others/Другие |
---|---|
Colors/Цвет | enhanced geometries, inner geometries first/улучшенная геометрия, сначала внутренняя геометрия |
Шаг 2: процесс лазерной обработки
Измените настройки параметров. Параметры могут отличаться в зависимости от используемого лазерного станка и доступной мощности лазера.
Совет:
Измените порядок цветов в JobControl с красного на синий, чтобы материал был сначала выгравирован, а затем разрезан.
Параметры для лазерного гравера:
Цвет | Процесс | Мощность (%) | Скорость (%) | ppi/Hz |
---|---|---|---|---|
черный | Гравировка CO2 | 20 | 50 | 500 |
красный | Гравировка CO2 | 12 | 1.5 | 1000 |
синий | Резка CO2 | 5 | 1.5 | 1000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | вкл | +2.5 mm | - |
1 | вкл | - | - |
1 | вкл | +2 mm | - |

Шаг 3: пост-обработка
Достаньте обложку из лазерного станка и вставьте ее в каталог.
Идеи
Цветные принты также отлично смотрятся на этом материале. Нет предела вашему творчеству.