diy vintage sign detail

Vintage inspired sign "Diner"

With a few TroGlass materials and some time, you can produce this impressive vintage "Diner" sign.


Used material
  • 1 sheet TroGlass Clear 3mm
  • 1 sheet TroGlass Color Gloss Red with adhesive
  • 1 sheet TroGlass LED Orange with adhesive
  • 1 sheet TroGlass Satins Orange with adhesive
  • 1 sheet TroGlass Color Gloss Yellow with adhesive
  • 1 sheet TroGlass Color Gloss White with adhesive
  • 1/4 sheet TroGlass Metallic Bright Silver with adhesive
  • 1/4 sheet TroGlass Reverse Gloss/White Blue with adhesive

Browse our product range at trotec-materials.com

Machine used
  • SP500
  • 200 watts
  • 2.5" lens
  • white acrylic cutting grid

You can use any machine of the Speedy laser engraver or SP laser cutter series. Eventually you will have to adapt the file according to the working area of your machine.

Vintage Sign Diner


Download now

Step by step

print settings troglass sign
Step 1

Step 1: Import graphic file

Import our template and adapt it to your requirements. Send the graphics to the laser using the driver settings below.

Print settings:

Process mode Resolution Cut line
Standard 500dpi none
Halftone Others
Color Optimized geometries
inner geometries first
overview acrylic sheets used
Step 2

Step 2: Laser process acrylic

Define the correct material settings. The laser parameters may vary depending on the type of laser machine and available laser power.

Laser Parameters:

Color Process Power (%) Speed (%) ppi/Hz
red Cut CO2 100 1.8 20,000
Passes Air Assist Z-Offset Direction Advanced
1 ON - - -
Step 3

Step 3: Assembly

Remove the protective foil from the clear acrylic and apply the orange arrow. Then add the arrows out of TroGlass Satins orange, TroGlass Color Gloss yellow and white. Then place the red acrylic sheet directly beneath the arrows. For the "Diner" letters, start positioning TroGlass Color Gloss Metallic. Add the white and blue letter parts on top of the "Diner" letters. Next place the white highlight circles on top of the orange arrow.

diy vintage sign diner


The TroGlass series is perfect for such eye-catching vintage signs due to the variety of colors and the easy workability. Use different colors or materials for your sign. The creative possibilities are endless!

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo