business card stand cardboard

Business Card Display

In this guide, we show you how easy it is to use cardboard creatively. Laser your own individual business card racks or displays for city maps, flyers, brochures etcetera.


Required material

Used material:

KATZ display board, neon or black, 1,6mm thickness

Trotec laser used

Speedy 400, 80 watts, 1.5 inch lens;

Black Aluminium Cutting Grid Table



Download now


Download now

Step by step

business card stand cardboard
Step 1


Open our graphics template or create your own design. We have prepared two design suggestions:

  • Business card rack with name
  • Display for brochures or city maps with the corresponding skyline

In this video tutorial we show you how to get from a picture of your choice to the drawn skyline.

See tutorial

cardboard display laser cutting
Step 2

Laser process

During the laser cutting and engraving of the stand, it is very important to ensure that the full extraction power is available at the processing table. For optimal results, cover the free processing area with paper or cardboard.

Depending on how delicate the graphics are, the cutting speed should be adjusted.

Laser parameters:

Engraving: Power: 20% - Speedy: 30% - Frequency: 500ppi – Air-Assist: ON – Z-Offset: +0,5mm
Slitting: Power: 6% - Speed: 0,6% - Frequency: 1000 Hz – Air-Assist: ON
Cutting: Power: 15% - Speed: 0,5% - Frequency: 1000 Hz – Air-Assist: ON

business card stand instructions
Step 3

Step 3: Assembly

  1. Take the stand and rotate the lower part with the engraving to the left.
  2. Bend the same part inwards, using the scribed lines.
  3. Insert the tabs into the slits intended for that purpose. During this step, make sure that you do not exert too much pressure onto the pattern for the rounding.
  4. For improved stability, eventually bend the top of the tab at the scribed line inward.
  5. Now only your business cards are missing.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo