Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Looking to increase productivity but not quite ready to invest in another laser engraver or laser cutter? Consider "powering up." Every Trotec flatbed laser machine can be upgraded to a higher laser power at any time. This is a cost-efficient way to boost your output and profits. Only a few parts of the laser machine have to be replaced for the upgrade, so it can be implemented quickly and easily.
A laser machine with higher power translates into higher output rates without any compromises in quality, allowing you to accomplish more in less time. You can also offer your customers a wider range of products, since some applications require a laser engraver or laser cutter with higher power settings. This results in higher profitability for your business.
Data plate, array 700 x 420 mm, 49 pcs,
each 100 x 60 mm
Laser power: 30 watts
Progress: 48 % finished
Time: 55 sec.
Laser power: 80 watts
Progress: 100 %, finished product
Time: 55 sec.
Cast acrylics, 3 mm, sheet size 500 x 415 mm,
200 pcs, each 50 mm high
Laser power: 30 watts
Progress: 46 % finished
Time: 7 sec.
Laser power: 80 watts
Progress: 100 %, finished product
Time: 7 sec.