See our lasers in action!
Laser engraver and cutter
Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
| ⚫ Engrave | ⚫ Cut | ⚫ Mark |
| Laser type: | CO₂, Fiber or Flexx laser |
|---|---|
| Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
| Max. workpiece height: | 4.9 - 12.0 inch |
| Laser power: | 20 - 120 watts |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Engrave | ⚫ Cut | ⎯ Mark |
| Laser type: | CO₂ laser |
|---|---|
| Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
| Max. workpiece height: | 2.0 - 4.4 inch |
| Laser power: | 40 - 400 watts |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Engrave | ⎯ Cut | ⚫ Mark |
| Laser type: | CO₂ or Fiber laser |
|---|---|
| Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
| Max. workpiece height: | 9.8 - 30.1 inch |
| Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Updating the display of the processing time in JobControl®
Display of the processing time per machining process
The machining processes, such as cutting or engraving, are displayed in different colors in JobControl®. A processing time is calculated for each of these processes.
The calculation of this processing time is based on the laser parameters entered:
- Speed
- Passes
If these are changed in the material database, the processing time must also be recalculated in order to be displayed correctly.
Recalculating the processing time
Double-click on the processing plate to access the material database.
There you can change the laser parameters.
Now you have to recalculate the processing time:
- Click on the current job on the plate.
- Click on the “Refresh” button (bottom left).
The processing time is recalculated.
Further information
Need more help?
Contact the Trotec service hotline where top qualified and motivated laser experts will assist you with any questions or problems.
X 
