Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
This tutorial shows you the basics on getting started with the ProMarker marking laser. It will cover the steps such as how to switch on the laser rack and check the warning lights. Use this quick start guide for troubleshooting assistance, to answer procedural questions, and as a handy reference for less experienced laser users.
Laser marking with a ProMarker is as simple as printing. The supplied and already pre-installed laser software DirectMark operates like a printer driver. You process your graphics in your known graphics program (e.g. CorelDraw in this tutorial), and send the desired data file to the laser via a print command. In this manual you will learn how to handle this simple marking task:
Now you have successfully personalized your product.
This tutorial is a time-saving guide for companies with multiple, changing operators. The purpose is to enable employees who only occasionally work with the laser, as well as newly employed personnel, to operate the marking laser within a very short time so you can keep production running.
Download Tutorial: DirectMark Tutorial 1 - Quick Start Guide