See our lasers in action!
Laser engraver and cutter
Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
| ⚫ Engrave | ⚫ Cut | ⚫ Mark |
| Laser type: | CO₂, Flexx or Fiber laser |
|---|---|
| Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
| Max. workpiece height: | 4.9 - 12.0 inch |
| Laser power: | 20 - 120 watts |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Engrave | ⚫ Cut | ⎯ Mark |
| Laser type: | CO₂ laser |
|---|---|
| Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
| Max. workpiece height: | 2.0 - 4.4 inch |
| Laser power: | 40 - 400 watts |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Engrave | ⎯ Cut | ⚫ Mark |
| Laser type: | CO₂ or Fiber laser |
|---|---|
| Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
| Max. workpiece height: | 9.8 - 30.1 inch |
| Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
How to print from AutoCAD
In this how-to we show you how easy it is to send your AutoCAD data to your Trotec laser machine.
Additional resources
Have additional questions or need more help?
Feel free to contact the Trotec service hotline and one of our motivated and top qualified laser experts will gladly provide you with any additional information that you need
Step 1: Set line weight and color
Use RGB colors (the same like in the JobControl® material database)
For Trotec Lasers cutting line must be 0.001 mm - in AutoCAD 0.00 mm
Step 2: Printer Settings
Click on the printing symbol and the printer dialog window will open. Choose plotter "Trotec Engraver v. xx.x.x" and click on "Properties...".
Click on "Custom Properties" in the Plotter Configuration Editor.
Step 3: Set the laser parameters:
- Set the size (width and height must be higher than the graphic size)
- Mark "Minimize to Jobsize" if you want to print the graphic without any blank area.
- Click the JobControl® logo button to print
The Plotter Configuration Editor will appear, click on "OK" to proceed.
- Create a temporary PC3 file to apply to this plot only: The printer configuration will be saved only for this print.
- Save changes to the following file: The printer configuration can be saved, to use it the next time again. Click on "OK" to proceed.
Step 4: Plot area settings
- Choose the plot area:
- Display: The actual visible area is getting printed.
- Extents: All graphics getting printed.
- Window: Choose the area which shall be printed.
- Mind the plot scale 1:1
- Center the plot if necessary
- To send the job data to JobControl® click OK
X 
