Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
This tutorial demonstrates how to cut and engrave on wood veneer: Trolase thins 0.5mm and Trolase 3.2mm thick.
Engraving materials available at Trotec. Browse our product range at www.trotec-materials.com
For this application sample you can use any laser machine from the Speedy laser enagraver series.
If you are cutting only, we suggest leaving the clear film over the laminate material.
Create a design of your own, or use the template provided. Send it to the laser with the recommended laser parameters given. Parameters can vary depending on the machine used, available laser power, as well as material thickness.
Process | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
color | enhanced geometries, inner geometries first |
Place the wood veneer onto the lasers honeycomb cutting table, and cover the additional work area to produce a stronger vacuum. Remember that the parameters can differ, so adjust accordingly.
Laser process | Color | Process | Power (%) | Speed (%) |
---|---|---|---|---|
Engraving Wood veneer | Black | Engraving | 80 | 100 |
Cutting Wood veneer | Red | Cutting | 90 | 1.3 |
TroLase 3.2 mm | Red | Cutting | 85 | 1.2 |
Cutting TroLase Thins 0.5 mm | Red | Cutting | 100 | 1.5 |
Engraving TroLase Thins 0.5 mm | Black | Engraving | 40 | 25 |
ppi/Hz | Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|---|
500 | 1 | off | - | None |
1000 | 1 | on | - | None |
1000 | 1 | on | -2 mm | None |
1000 | 1 | on | - | None |
500 | 1 | off | - | None |
Remove the adhesive film off the back of the TroLase Thins and fasten to the wood veneer. Next, arrange the colored laminate pieces into the wood veneer cutouts, and your turkey rings are complete.