What is the maximum dimension for rotary engraving attachments?

What are the largest specifications for glass processing that can be used with a laser etching rotary attachment?

Rotary engraving attachments are offered in a variety of sizes and designs, all which will vary greatly depending on the laser system. Using a special roll attachment, you are able to laser etch objects with various sized openings that do not normally fit into the cones of standard configurations. The graph below provides maximum material weight and dimensional restrictions for processing:


Trotec laser engravers offer rotary attachments available with the following systems:


  Speedy 100  Speedy 300 Speedy 360 Speedy 400 SP 500
Rotary engraving attachment, tiltable
Rotary engraving attachment with cone
Rotary engraving attachment with rollers
Combined rotary engraving attachment
(cone and rollers can be exchanged)
Maximum workpiece length 13.77 in 19.09 in (cone)
26.77 in (roller)
26.70 in (cone)
29.30 in (roller)
29.88 in (cone)
37.55 in (roller)
33.07 in (cone) 
40.94 in (roller)
Maximum workpiece diameter* 4.64 in 7.24 in (cone)
3.70 in (roller)
8.10 in (cone)
3.70 in (roller)
10.60 in(cone)
7.10 in (roller)
9.84 in (cone)
5.90 in (roller)
Maximum weight 6.6 lbs 6.6 lbs (cone)
22 lbs (roller)
6.6 lbs (cone)
22 lbs (roller)
6.6 lbs (cone)
22 lbs (roller)
6.6 lbs (cone)
22 lbs (roller)

* The maximum diameter depends on the inserted lens!

Further information

For additional information regarding a rotary engraving attachment, utilize our step-by-step online instructions- how to use the rotary engraving attachment, or contact the Trotec service hotline. One of our highly qualified and trained laser experts will gladly assist you with any problems or questions you have about rotary engraving or any other technical laser engraver questions.



See our lasers in action! Request a demo now
Request a demo now