Unique Christmas tree with decorations

Step by Step instruction


Unique Christmas tree with decorations

Step by Step instruction

This Christmas Tree is a show-stopping, eye-catching beauty! Below, you can learn how to make it using your Trotec laser machine and our Trotec materials.


You Will Need

(You can use any colour TroGlass you wish, the sky is your only limit! Also, try using the offcuts for decorations!)

Machine Used
  • SP500
  • 60 Watt
  • 3.75" lens
  • Slat cutting table / Acrylic cutting grid table

For this sample we recommend using any laser machine from the SP laser cutter series.


Remember: every laser engraving machine is different! You may have to adjust the slots to suit the lens/machine you are using.



Download now


Download now

Step by step

Step 1

Step 1: Import / Create the Design Template

Create your own design or import the template that we have provided. Then, send it to your laser machine using the recommended laser parameters. These settings will vary depending on the laser machine you are using and its available power. 

Print Settings:

Process Mode Resolution Cut line
Standard 500 dpi None
Halftone Others
Black & White Enhanced Geometries Inner - Geometries First
Step 2

Step 2: Laser Process

Place the material inside your laser machine and cover the rest of the table with paper to improve the vacuum. You will require 6 side parts (2 per sheet) and 4 disks. Remove the protective foil once the cutting is complete.

Laser Parameters:

Colour Process Power (%) Speed (%) ppi/Hz
Red Cutting CO2 100% 0.65 10,000
Passes Air Assist Z-Offset Advanced
1 On - -


The material parameters for JobControl can be downloaded here: www.troteclaser.com

Step 3

Step 3: Post-Processing

To assemble your new Christmas tree, you need to friction-fit each section into the disks. Place the largest disk at the base of the tree and work your way up.

Please note: the disk at the very top of the tree is the one with two extra slots for securing your star. 


Now, it's time to decorate! You can use your usual Christmas ornaments, or even try decorating it with individually processed TroGlass ornaments. Look at some of the designs we have come up with at the bottom of this page, or even try creating some of your very own - the sky is your only limit!  

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo