acrylic jewelry

Let your imagination run wild and create your individual acrylic jewelry. Practically every design imagineable can be processed with Trotec lasers.

acrylic jewelry laser cut
acrylic jewelry laser cut


Required material
  • 3mm acrylics
  • eyelets and hooks
  • Acrylic can be purchased through the Trotec webshop
Trotec laser used
  • Speedy 300
  • 60 watts
  • 2.0 inch lens
  • Dark coloured or radiant acrylics look very elegant
  • Use a 2.0 inch lens for a perfect cut


Download now
Acrylic Jewelry


Download now

Step by step

Step 1

Step 1: Cut the jewelry

Create your own design or use our template (to download click here). Send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine being used and the available laser power.

Recommended cutting parameters:

power 100%, speed 1.0%, frequency 5000 Hz, Air Assist on

acrylic jewelry stand
Step 2

Step 2: Cut and engrave the jewelry stand

You can also either create your own or use our template for the design of the jewellery stand (for download click here). Be careful, the stand has to be high enough to carry a necklace and has to have a stable pillar.

Laser Settings

Recommended engraving parameters: power 20%, speed 50%, 500 ppi, Air Assist on

Recommended cutting parameters: power 100%, speed 0,5%, frequency 1000 Hz, Air Assist on

jewelry holder plexiglass
Step 3

Step 3: Assembly of the jewelry

Use eylets and hooks to attach the pieces on a necklace. There are special hooks for the earrings. You find such material in handicraft shops, on online platforms like Amazon or in special beading shops.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo