Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
From time to time, you may wish to export files from JobControl® to save them to an external drive, as a backup or to setup a new computer. JobControl® files are XML files that store backups of the laser parameters. Using the XML backups of the laser parameters, you can reimport the settings later.
Save the file to your preferred location, such as a back up drive or to your computers hard drive.
When you need to re-import the backup, or perhaps you're setting up a new laser computer, check out the guide below that will take you step-by-step through the process.
Need more support?
If you need more help exporting your laser parameters, please contact us for technical support.
back to overview