Learn how to create this stylish wall decoration using our high-quality laser acrylic material. A perfect statement piece that will add a pop of colour to any room or space.


Preparation

Material used:

  • 3 pieces TroGlass in different colours
  • Distance holders R15-15-FL

Machine used:

  • Speedy 400
  • 120 watts
  • 2" lens
  • Vacuum table with acrylic cutting grid table

Note: Any machine from the Speedy laser engraver series can be used for this application.


Step by Step

Step 1: Import the graphic file

Import the template we have provided and amend it to suit your requirements. Send the design to the laser machine using the below parameters.

Print Settings:

Process mode Resolution Cut line
Standard 500dpi none
Halftone Others
Colour Optimised Geometries, inner geometries first

Steps 2: Laser process

The parameters you choose will vary depending on the type of laser machine you are using and the available laser power.

Laser parameters:

Colour Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 100 1.2 5000
Passes Air Assist Z-Offset Direction Advanced
1 ON - - -

 

 


Step 3: Assembly

Mark drill holes into the wall using the back plate. Fix the plate to the wall with the distance holders. Add the coloured acrylic letters to the distance holders, ensuring that you secure them with an Allen key. Sit back and enjoy your creation!


This DIY can be created using a range of different materials, designs and fonts. Let your creativity flow and explore the endless possibilities!


Check out the Speedy laser engravers