thanksgiving napkin ring

Thanksgiving Turkey Napkin Rings

Learn how to laser cut and engrave a cool thanksgiving turkey napkin ring made from a range of different materials including TroLase and Wood.


Required Material:

Find all materials

Machine used:

  • Speedy 400 120 watt
  • 2" lens
  • Vacuum table with honeycomb cutting tabletop or acrylic cutting grid

You can use any laser machine from the Speedy laser enagraver series for this application.


We recommend keeping the clear film over the laminate material if you are only laser cutting.

Step by Step

Step 1: Import design file into Software

You can either create your own unique design or use the template we have provided. Send the file to the laser machine using the parameters specified below.

Note: The parameters may vary depending on the laser machine being used, the available laser power and the thickness of the material.

Print settings:

Process Resolution Cut line
Standard 500 dpi None
Halftone Others
Colour Enhanced geometries, inner geometries first

Step 2: Cutting and engraving on Wood veneer and TroLase

Place the material on the honeycomb cutting table in your laser machine. Ensure that the rest of the working area is covered in order to create a stronger vacuum.

Laser parameters:

Laser process Colour Process Power (%) Speed (%)
Engraving Wood veneer Black Engraving 80 100
Cutting Wood veneer Red Cutting 90 1.3
TroLase 3.2 mm Red Cutting 85 1.2
Cutting TroLase Thins 0.5 mm Red Cutting 100 1.5
Engraving TroLase Thins 0.5 mm Black Engraving 40 25
ppi/Hz Passes Air Assist Z-Offset Advanced
500 1 off - None
1000 1 on - None
1000 1 on -2 mm None
1000 1 on - None
500 1 off - None

Step 3: Assembly

Peel the adhesive film off the TroLase Thins cut-outs. Then proceed to placing the laminate cut-outs into the Wood veneer cut-outs. You can use whichever colour order you prefer.

Check out our Speedy laser engraver series

See our lasers in action! Request a demo now
Request a demo now