Weekly planner made of slate

Want to see all the events and tasks on your weekly calendar at a glance? Our slate planner is the perfect solution.

slate-laser-engraving
slate-laser-engraving

Preparation

You Will Need
Machine Used
  • Speedy 100
  • 40 Watt
  • 2" lens
  • Honeycomb cutting table for wood cutting

You can use any machine from the Speedy series to create this sample.

Important

Be sure to use the extra strong adhesive for the TroLase ADA Signage to ensure that the slate board remains securely fixed. 

Slate Weekly Panner

ZIP

Download now
Laser Parameters Slate Planner

ZIP

Download now

Step by step

slate-laser-engraving
Step 1

Step 1: Slate Board

Create your own design for the weekly planner, or feel free to import our template. Then, adapt the graphic to the size of the slate board if you need to.

Now, send the job to the laser machine using the following driver settings:

Print Settings:

Process Mode Resolution Cut Line
Standard 500 dpi None
Halftone Others
Colour  -
laser-engraving-stone
Step 2

Step 2: Laser Process (Slate):

Create the material parameter settings. These parameters can vary depending on the laser machine you are using and its available power.

Tip:

We suggest testing the parameters on the back of the slate board before you decide to begin the project. This way, you can make any alterations before possibly ruining your board.

Laser Parameters

Colour Process Power (%) Speed (%) ppi/Hz
Engraving: Black Engrave CO2 60 100 500
Scratching: Red Cut CO2 20 2 1000
Passes Air Assist Z-Offset Advanced
1 On - Optimised Quality
1 On +6mm -
laser-solid-wood
Step 3

Step 3: Wooden Frame

Create your design or import our provided template. Adapt the graphic to the size of the slate sheets if you need to.

Now, send the job to your laser machine using the following driver settings:

Print Settings: 

Process Mode Resolution Cut Line
Standard 500 dpi None
Halftone Others
Colour Optimised Geometries, Inner Geometries First

Tip:

Before you begin cutting, be sure to measure the thickness of the wooden sheet. Adapt the kerf is you need to. Finally, ensure that the slate sheet fits inside the wooden frame.

solid-wood-laser-cutting
Step 4

Step 4: Laser Process (Wooden Frame)

Now you need to determine and enter the material's parameter settings. Please note that these parameters may vary depending on the laser machine you are using and its available power. 

Laser Parameters - Cutting

Colour Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 95 0.3 1000
Passes Air Assist Z-Offset Advanced
1 On - -

Info:

We decided to use the standard parameters in JobControl for solid wood oak.

laser-back-slate-planner
Step 5

Step 5: Back

Create your own design or feel free to import the template that we have provided. 

Now, send the job to your laser machine using the following driver settings:

Print Settings:

Process Mode Resolution Cut Line
Standard 500 dpi None
Halftone Others
Colour Optimised Geometries, Inner Geometries First
laser-material-trolase-laser-cutting
Step 6

Step 6: Laser Process (Back)

Determine and enter the material's parameter settings. Please note that these parameters can vary depending on the laser machine you are using as well as the available power.

Laser Parameters

Colour Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 90 2 1000
Passes Air Assist Z-Offset Advanced
1 On - -

Info:

We decided to use the standard parameters in JobControl for TroLase ADA Signage, optimised for quality.

assemble-diy-slate-planner
Step 7

Step 7: Assembly

Place the slate board inside your wooden frame. Note that this step is vital! This is because the wooden frame needs to accommodate for the size of the slate. This will, in turn, prevent the wood from becoming warped or distorted later.

Next, glue the back of the TroLase ADA Signage to the wood and slate. You'll be pleased to know that this process doesn't need to be 100% perfect! Our design leaves a fair amount of 'wiggle room' for positioning the back plate. You just need to attach it as best as you can.

Finally, place the signage mounts on the back of the board. Your weekly planner is now ready for all your organisation!

Inspirations

You can now personalise the weekly planner for your customers, or even your own desires! Have a play with different dimensions, shapes and designs. The sky is your only limit!

If you'd like, you can even use a cord to fix the planner to the wall instead of the signage mounting devices. If you decide to do this, leave out the two holes on the bottom of the frame.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo