Laser engraved brick

Find out how you can make an original present for home-builders using a simple clay brick.


Required material:

  • Clay brick from the DIY store

Machine used:

  • Speedy 360, 100 Watt
  • 1.5" lens
  • Vacuum table

For this sample you can use any laser machine from the Speedy laser engraver series.


We used the 1.5" lens because we wanted to engrave a plan with many details. For design with less details, use the 2" lens.

Step by Step

Step 1: Import design

Make your own design or import our template. Send the job to the laser using the driver settings below.

Print driver settings

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others

Step 2: Engraving the brick

Put the brick into your Trotec laser and focus on the surface of the material. Make the material parameter settings. The parameters can vary depending on laser machine and available laser power.

Laser Parameters engraving

Color Process Power (%) Speed (%) ppi/Hz
black engrave CO2 100 30 500
Passes Air Assist Z-Offset  Advanced
1 on +1 mm high quality

Step 3: Cleaning

Use a wet sponge to clean the surface and bind the dust. - This original present is ready to be sold.


Individualize the bricks with names or dates.

Trotec Product recommendations

See our lasers in action! Request a demo now
Request a demo now