Decorate your textiles with your favourite designs, logos and lettering "screen-printing like".
LaserFlex film, T-Shirt, heat press
Used Trotec Laser:
- Speedy 300
- 60 watts
- 2 inch lens
- Vacuum table with honeycomb cutting table
Create your own design or use our template. Send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.
Engraving: Power: 50 %, Speed: 50 %, Resolution: 500 dpi, air assist on
Cutting: Power: 12 %, Speed 1 %, Frequency 1000 Hz, air assist on
Use a heat press for transferring the LaserFlex on textiles. Transfer the film for 60 seconds at 175°C / 347°F. Remove the liner when the material is completely cold.