Laser cut and engraved
Christmas card

Send your Christmas greetings this year with a laser-cut Christmas card made of three different materials (cardboard, felt and wood veneer). You don’t have felt ready? No worries, you can also design the card only with wood and cardboard. You can even use the wooden cutouts as christmas tree or window decoration.

wooden greetings card laser cut
wooden greetings card laser cut

Preparation

Required material
  • Veneered Wood, 3/64"
  • Green Polyester Felt, 1/8"
  • Coloured Cardboard
Machine used
  • Speedy 300, 80 Watts or
  • SpeedMarker CL, 200 Watts
  • 1.5 inch lens
Tips
  • We recommend using thin, pvc-free doublesided tape on the back of the veneer and cut wood and tape at the same time. The assembly is then very easy.
csm_Template-wooden-christmascard_77459485e4.png

PDF

Download now
Wooden Christmas Card

ZIP

Download now

Step by step

christmas card wood laser cut
Step 1

Step 1: Cutting and engraving wood

With the Speedy 300:

Open the file and send it to the laser. Put the chosen veneer into the machine and select the parameters. The parameters used depend on the machine used and the laser power, so they may vary. If nothing else is mentioned, all steps are performed in one pass.

  • Engraving: Power 70%, speed 50%, frequency 500 Hz, air assist on, z-offset 0
  • Cutting: Power 65%, speed 2%, frequency 500 Hz, air assist on, z-offset 0

Alternative: with the SpeedMarker CL:

Import the file (download) to SpeedMark and start the laser job.

  • Engraving: Power 40%, speed 1500 mm/s, frequency 10 000 Hz, filling 0.2mm
  • Cutting: Power 100%, speed 300mm/s frequency 5 000 Hz
laser cut christmas card
Step 2

Step 2: Cutting felt

If you want, you can perform the felt cutting in one pass as well (e.g. with the Speedy 300 and 28% performance). But you have to be aware that the edges then may be a little bit melted.

With the Speedy 300:

Like with the wood engraving, open the downloaded file and send it to the laser. Choose your felt and put it into the machine.

  • Cutting: Performance 12%, speed 2%, frequency 1000 Hz, air assist on, z-offset 0, 3 passages

Alternative: with the SpeedMarker CL

Import the file to SpeedMark and start the laser job.

  • Cutting: Power 30%, speed 1000 mm/s, frequency 10 000 Hz, 2 passages
wooden greetings card laser cut
Step 3

Step 3: Assembly

The assembly is very easy: just stick the veneer on the cardboard and then fix the felt with glue in the cut parts of the veneer. The Christmas card is ready to be sent!

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo