Laser engraved trophy label made of TroLase Foil
Learn how you can make an individual trophy sticker with a Speedy flexx and TroLase foil.
![trolase foil laser engraving](/static_processed/f6f5ccd02123b8e6059d99080f3a52fa/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/trophy-label/trolase-foil-laser-engraving.jpg","edits":{"resize":{"width":1280,"height":640,"fit":"cover"}}})
Preparation
Materials
- 1/4 sheet of TroLase Metallic Plus Brushed Stainless Steel/Black (1/8")
- Material to cover the laser's work area (e.g., printing paper)
Trotec Laser and Accessories
NOTE: Any CO2, fibre, or flexx™ laser from the Speedy series can be used for this project.
Tip
Although metallic TroLase materials can be processed with a CO2 laser, we recommend using a fibre laser because it is capable of engraving minute details with greater clarity.
Step by step
![print settings trolase foil](/static_processed/250bd34b130c7228330f81194a2febd9/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/trophy-label/print-settings-trolase-foil.jpg","edits":{"resize":{"width":650,"fit":"cover"}}} "print-settings-trolase-foil.jpg")
Step 1: Configure the Design and Send the File to JobControl®
Create your own design, or use our template (available below) and resize the graphics as needed. Use the following JobControl® Process Options in the Print menu:
| Process mode | Resolution | Cut line | Halftone | Others |
|---|---|---|---|---|
| Standard | 1000 dpi | None | Color | - |
NOTE: If you are using a Speedy flexx/fibre system, ensure to select a 1000 dpi resolution. Combined with the precision of a fibre laser beam, a high design resolution will offer optimal processing results.
![laser engraving trolase foil](/static_processed/63fca8c3d0168016e61b140843af7b50/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/trophy-label/laser-engraving-trolase-foil.jpg","edits":{"resize":{"width":650,"fit":"cover"}}} "laser-engraving-trolase-foil.jpg")
Step 2: Process the TroLase Metallic Plus Sheet
Place the TroLase sheet on your laser's work area, and ensure that the material is in focus. Next, enter the parameters specified below in the JobControl® Materials database window.
Process the sheet in the following order:
- Engrave
- "Scratch effect" cut
- Kiss cut
- Cut
NOTE: The exact parameters may vary depending on your laser system and its wattage.
Engraving Parameters
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| Black | Engrave FLP | 20 | 55 | 30,000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | on | 0mm | - |
"Scratch-Effect" Parameters
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| Red | Cut CO2 | 8 | 1 | 1000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | On | 4 mm | - |
Kiss Cutting Parameters
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| Blue | Cut CO2 | 9 | 1 | 1,000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | On | - | - |
Cutting Parameters
| Color | Process: | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| Green | Cut CO2 | 40 | 2 | 1,000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | On | - | - |
![cleaning trolase foil](/static_processed/7f9d58568ac7768d640b2d959e95f64f/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/trophy-label/cleaning-trolase-foil.jpg","edits":{"resize":{"width":650,"fit":"cover"}}} "cleaning-trolase-foil.jpg")
Step 3: Clean the Material
Wipe the processed TroLase sheet with a damp cloth. So that the material may dry more quickly, keep the sheet on the laser's work area with the exhaust system enabled.
![inspiration laser engraving trolase foil](/static_processed/52cc42b84750502c6fd8b73462cbde40/.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/trophy-label/inspiration-trolase-foil.jpg","edits":{"resize":{"width":640,"fit":"cover"}}})
Inspiration
- Get creative by using various TroLase Metallic Plus colours and thicknesses
- Use TroLase Metallic Plus for outdoor applications, such as mailbox labels or house numbers
![](/static_processed/666fff4d72dd3cc08ac610849af36edf/laser-engraver-speedy-400-left.png?{"image":"https://backend.troteclaser.com/static/images/Laser_Machines/Speedy_Series/laser-engraver-speedy-400-left.png","edits":{"extract":{"top":142,"left":497,"width":933,"height":393},"resize":{"width":650,"fit":"cover"}}})
![](/static_processed/86036e30dfb64f111e0262ca17280c76/tlca_mike.png?{"image":"https://backend.troteclaser.com/static/images/contact/TLCA_Mike.png","edits":{"resize":{"width":194,"height":194,"fit":"cover"}}})
