- Clay brick from the DIY store
- Speedy 360, 100 Watt
- 1.5" lens
- Vacuum table
For this sample you can use any laser machine from the Speedy laser engraver series.
We used the 1.5" lens because we wanted to engrave a plan with many details. For designs with less details, use the 2" lens.
Step 1: Import design
Create you own design or simply use our already created file. Send the job to the laser machine using the settings below:
Print driver settings
|Process mode||Resolution||Cut line|
Step 2: Engraving the brick
Place the brick in your laser machine, focus on the material and set the material speed and power. Keep in mind that the parameters will vary based on the type of machine and the laser power that is used.
Laser Parameters engraving
|Color||Process||Power (%)||Speed (%)||ppi/Hz|
|1||on||+1 mm||high quality|
Step 3: Cleaning
Use a wet sponge to clean the surface and bind the dust. This original present is ready to be sold.
Individualize the bricks with names or dates.