Thanksgiving Turkey Napkin Rings
Engraving materials available at Trotec, browse product range: www.trotec-materials.com
- Wood veneer
- TroLase Thins with double-sided adhesive tape
- TroLase - thickness: 3.2mm
- Speedy 400 120 watt
- 2" lens
- Vacuum table with honeycomb cutting tabletop or acrylic cutting grid
For this application sample you can use any laser machine from the Speedy laser enagraver series.
We suggest keeping the clear film over laminates material if you are only cutting.
Step by step
Step 1: Import design file into Software
Create your own design or use our template. Send it to the laser with the recommended laser parameters given. The parameters might vary depending on the machine used and the available laser power as well as material thickness.
|color||enhanced geometries, inner geometries first|
Step 2: Cutting and engraving on Wood veneer and TroLase
Place the material on the honeycomb cutting table in your laser and cover the rest of the work area to create a stronger vacuum. The parameters can differ depending on the laser machine used and laser power available.
|Laser process||Color||Process||Power (%)||Speed (%)|
|Engraving Wood veneer||Black||Engraving||80||100|
|Cutting Wood veneer||Red||Cutting||90||1.3|
|TroLase 3.2 mm||Red||Cutting||85||1.2|
|Cutting TroLase Thins 0.5 mm||Red||Cutting||100||1.5|
|Engraving TroLase Thins 0.5 mm||Black||Engraving||40||25|
Step 3: Assembling Napkin Ring
Take the cutout of the trolase thins with adhesive film off the back and stick it to the Wood veneer. Then place the laminate cutouts into the cutouts on the Wood veneer in whichever color order you like.