Napkin ring made with technical cutting for bending applications

In this tutorial we will show you how to use the "Kerf Cut" process to make a napkin ring out of wood.

Inspirations for wooden napkin rings


Required Material
Machine Used
  • Speedy 360, 120 Watt
  • 1.5" Lens
  • big and small nozzle
  • vacuum table with acrylic and honeycomb cutting tables

You can produce this design using any laser machine from the Trotec Laser Speedy series.


We used a 1.5" lens due to the detailed cuts of the design.


Download now

Step by step

Step 1

Step 1: Design

Import our graphic and adapt it to your requrements. We have already tested cutting techniques for bending applications for you. In our Tips & Tricks "Kerf Cut" you'll find further examples of how you can use this application.

Print Settings:

Process mode Resolution Cut line
Vector Job 1000dpi No
Halftone Others
Color Optimized Geometries, Inner Geometries first
Step 2

Step 2: Laser processing the wood veneer

Place the honeycomb cutting table in your Trotec laser and attach the small nozzle to the laser head. Place the walnut plate in your laser and cover the remaining working surface. The parameters may vary depending on the laser machine used and available laser power.

Laser parameters:

Color Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 100 1.2 1,000
Passes Air Assist Z-Offset Advanced
1 On 0mm -

We explain in our Tips & Tricks why you should choose the right nozzle for this application. How to choose the right nozzle.

Trotec print settings for Trolase Lights
Step 3

Step 3: Send the graphic

Send the graphic for the TroLase Foil decoration to your Trotec Laser machine using the following print settings:

Process mode Resolution Cut line
Vector Job 1000dpi No
Halftone Others
- Optimized Geormetries, Inner Geometries First
Step 4

Step 4: Laser process the TroLase Foil

Remove the honeycomb cutting table and install the acrylic grid cutting table and the large nozzle. Insert the TroLase Foil into the laser and cover the rest of the working area.


Color Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 20 1.0 1000
Passes Air Assist Z-Offset Advanced
1 On 0mm -


It is especially important to closely monitor the vacuum with the thin TroLase Foil to make sure a flat surface is maintained throughout the laser process.

Assembly wooden napkin ring
Step 5

Step 5: Cleaning and assembly

Clean the two separate parts with a damp cloth. It is also a good idea to clean the back of the wooding ring so that the napkin does not get dirty later.

Keep the wooden napkin ring flat and glue the TroLase Foil about half off.

To make sure that the overhanging half does not stick to the napkin, we scored and removed half of the adhesive foil on the back with a craft knife. To finish, form a ring around a cloth napkin and secure it with the circular connector.

Inspirations for wooden napkin rings


Use other types of veneered wood or TroLase Foil colors to match the look of the rest of the table top.

Design a whole wedding table top using your Trotec laser and Trotec materials. Inspirations can be found in our DIYs.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo