Coat rack for kids

Keeping the kids' rooms tidy is one of the most difficult jobs!

coat rack laser cutting

Convincing the little ones to clean up their rooms may be a little easier with a fun and decorative coat tree. This tutorial shows you how to create a custom coat rack for kids.


Required material
  • 1500 x 1000mm MDF wood panel 10mm
  • TroLase 1.6mm in different colours with adhesive film on back
  • TroLase ADA Signage 3.2 mm in different colours also with adhesive film on the backside

Find more information on TroLase laminates on

Used Trotec Laser
  • Wood: SP1500, 200 watts, 2.5 inch lens
  • Decoration: Speedy 360, 80 Watts, 2.0 inch lens


Download now


Download now

Step by step

laser cut wooden coat rack
Step 1

Step 1: Tree

Open our design template "Wood-Tree" for the tree made of MDF and the wooden hooks.

Feel free to customize the design to your children's style. For example, add their favorite animals or your child's name.

Put the wood panel in your SP1500 (200 Watts) and make sure that the smoother side is facing up. Use the small nozzle and the 2.5 inch lens to create perfect cutting edges.


Cutting: Power: 87% - Speed: 0.6% - Frequency: 1000Hz -
Air Assist: Gas1
Cutting-in: Power: 3% - Speed: 2% - Frequency: 1000Hz -
Air Assist: ON
Engraving: Power: 20% - Speed: 100% - Frequency: AUTO -
Air Assist: ON

We recommend using a fine sandpaper to smooth the edges and remove dust.

clothes rack for kids
Step 2

Step 2: Decoration

In the PDF "decoration," you will find the graphics for TroLase ADA Signage and TroLase. Use plates with adhesive film on the backside. This makes it easier to apply them on the wood.


TroLase 1.6mm
 Power: 60% - Speed: 1% - Frequency: 1000Hz -
Air Assist: ON
Engraving: Power: 50% - Speed: 70% - Frequency: 500 ppi -
Air Assist: ON - Z-Offset: 1.5mm

ADA ADA Signage 3.2mm
 Power: 90% - Speed: 0.5% - Frequency: 1000Hz - Air Assist: ON

coat rack building instructions
Step 3

Step 3: Assembly

Mount the hooks on the tree with screws. Choose the appropriate position for the hooks based on your child's height. When applying the laminates, make sure there is no dust residue on the wood. The tree looks too boring? Paint the wooden parts with vibrant colors!

wooden coat rack laser cut
Step 4

Step 4: Install

Install the tree to the desired location. For rubber boots, slippers, and shoes, place a shoe tray in front of the coat tree.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo