Techniques for paper finishing with laser engraving and cutting machines

Paper is a very exciting material for laser processing. It is extremely versatile and can be laser cut and laser engraved well for many different projects. Below is an example using a paper movie voucher. You can find the parameters used by us in the table below.

We have used the paper "Aqua Silver" from the series Gmund 925 with a grammage of 290 g/m².

Deep engraving

For deep engraving, you will need relatively more power output during engraving. Assign the first engraving color for this, in our case black.

In the parameter database, assign the appropriate parameters for the color black. Use a higher power output and a lower speed for deep engraving compared to customary engraving to achieve depth.

Light engraving

For an elegant effect, you can bleach out the uppermost layer or the surface of some types of paper. Bleaching out involves engraving in a way so that little or no material is removed.

Assign the next color for the surfaces you want to create. We used red for our project. For the engraving parameters, use lower power and a faster speed than you would normally use for engraving on paper.


The scratching technique can be used for filigree and very fine markings.

For this, assign cutting layer using a different color (we used blue) as a contour to the object.

Engraving line

The engraving line technique is similar to scratching, but with a different thickness. This is defined by the parameter setting.

Assign a cutting layer to the object again. (We used desert blue.) In the parameter settings, choose a Z-offset of about 2-5 mm for the cutting process, depending on the desired thickness of the line. The power output should be similar to the scratching line.


Parts of the card can also be separated with a perforation, which is a discontinuous cutting line.

To create this, draw a cutting line (we used cyan) and convert it into a curve. Then select a a dashed line for the line style. Use the same parameter settings as with the filigree cut.

Filigree cut

You can also cut in particular filigree writing, figure or ornament with the laser by drawing an arbitrary form with a cutting layer for this (we used cyan for this).

For you parameter settings, use a lower speed and power output than with the outer cut.

Outer cut

When cutting the card out you can use a separating cut if there are no elaborate curves in the design. Assign a cutting layer for this (see ours in green). 

Depending on the length of the straights to be cut, you can use up to 5% speed. Adapt the output power accordingly.

Material parameter settings:

Import the file and assign the correct material to the job. You can find the material for download on this page. Just make sure that you adapt the parameters according to the laser machine you are using (model, laser power). We used a Speedy 360 with 80 Watt and a 1.5" lens.


laser engraving machine applications


You can of course use all these techniques which we have presented to you here with other types of paper.

For an individual touch, you can also add photo engraving. In the Ruby® advanced material settings use the dithering option “Ordered”. The photo can have its own layer (color) so that you can define individual laser parameters to photo engraving.

Caution: Caution when using JobControl®: no other engraving techniques, such as light engraving or deep engraving, can be combined in with photo engraving or the halftone "Ordered Dithering". The colors used for this would be screened, thus converted into gray scale. However, these settings do not have an effect on the colors of the cutting lines. If you still would wish to accommodate all techniques in the card, send the image separately and work with markers for exact placement.

Get personal support from our laser experts.

Technical support
Proud member of troGROUP Logo