Air Assist
Each material reacts differently to a laser process. During laser engraving and laser cutting, the supply of compressed air can significantly influence and improve the results.
More details
Laserati DT Laser for Producing Stamps
The optimal laser machine for rubber stamp engraving
Overview
Specially developed for rubber stamp engraving
The Trotec Laserati is a particularly powerful CO2 laser engraving machine that was specially developed for rubber stamp engraving. During the process, up to 4 DIN A4 laser rubber plates are clamped on a roller and are held in place by a vacuum. Thanks to its special design, this laser machine will engrave an A4 laser rubber page in approximately 20 minutes (engraving depth 1.1 mm). The drum works virtually without wear and tear while delivering an excellent engraving quality.
The benefits of our laser machine
Minimum ongoing maintenance, low production times, high production volumes and maximum quality at the same time. The Laserati DT is the optimal laser machine for stamp manufacture.
Technical data
Laser type: CO₂ laser
Work area: 33,1 x 11,7 inch
Laser power: 105-220 watt
