Updating the display of the processing time in JobControl®

The laser cutting and engraving processes are displayed in different colors in JobControl®, and a processing time is calculated for each process.
The calculation is based on the laser parameters entered for:

• Speed
• Passes

If these parameters are changed in the material database, the processing time must also be recalculated in order to be displayed correctly.

Double-click on the processing plate to access the material database. Enter the updated laser parameters in the appropriate fields.

Now you can recalculate the processing time:

1. Click on the current job on the plate.
2. Click on the “Refresh” button (bottom left).

The processing time will recalculate.