Find out how you can make an original present for home-builders using a simple clay brick.
- Clay brick from the DIY store
- Speedy 360, 100 Watt
- 1.5" lens
- Vacuum table
For this sample you can use any laser machine from the Speedy laser engraver series.
We used the 1.5" lens because we wanted to engrave a plan with many details. For design with less details, use the 2" lens.
Make your own design or import our template. Send the job to the laser using the driver settings below.
Print driver settings
|Process mode||Resolution||Cut line|
Put the brick into your Trotec laser and focus on the surface of the material. Make the material parameter settings. The parameters can vary depending on laser machine and available laser power.
Laser Parameters engraving
|Color||Process||Power (%)||Speed (%)||ppi/Hz|
|1||on||+1 mm||high quality|
Use a wet sponge to clean the surface and bind the dust. - This original present is ready to be sold.