Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Make an individual laptop bag out of Softshell
Use your laser to cut, mark or engrave textiles. We used Softshell material to create this individual laptop bag.
For this sample you can use any laser machine from the Speedy laser engraver series.
Why not experiment with different engravings and artwork for a personalised effect?
Import our template or create your own design. The file provided is suitable for a 14" laptop, but you can easily adapt it to any other size.
The design consists of two parts: The outer part with pattern; and the inner part with outside contour and marking for the seam.
Send the job to the laser using the following printer driver settings:
Standard | 500 dpi | none |
Process mode | Resolution | Cut line |
---|
Colour | Optimized geometries, inner geometries first |
Halftone | Others |
---|
Please test the material before you start engraving the bag.
Position the fabric into the laser with the inside down and start with the first graphic. Of course, you can personalise and individualize the bag before that. Once you have cut out the laptop cover, turn it and use the laser to mark the seam line (if required)
Adjust the parameter settings. The parameters can differ depending on the laser machine used and laser power available. (Please note: the parameters for black are only necessary if you also want to engrave it.)
Colour | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Black | Engrave CO2 | 80 | 30 | 500 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | - | - |
Colour | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Red | Cut CO2 | 10 | 1.5 | 1000 |
Blue | Cut CO2 | 7 | 2 | 1000 |
Colour | Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|---|
Red | 1 | on | - | - |
Blue | 1 | on | +3mm | - |
Insert the eyelet before you close the lateral seam. Please follow the instructions provided with the eyelets.
Then close the seam on the left and the right side of the cover. The scratching lines help you to use the correct position for the seam.
Now insert the rubber band, knot it together and your laptop bag is ready.