The Jottbook has a flexible cover that can be easily cut with a laser. We have created a tree design for our notebook. To give more stability to the fine details, we've glued a piece of paper on the inside of the cover after the laser process.
Use the Aluminum Cutting Grid Table and cover the surface around the workpiece to focus the vacuum suction.
2: air flow shutter
If using an air flow shutter, please close it to achieve optimal suction on the table and not on the exhaust slots.
3: laser process
Open the design and send it to the laser.
Cutting: Power: 20% - Speed: 0.5% - Frequency: 1000 Hz - Air Assist: OFF -
Z-Offset: -1 mm