Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Step by step instructions
Customize conventional door mats with your Trotec laser and add extra value to this product quickly and easily.
Depending on the size of the door mat, you can use any other machine of the Speedy laser engraver series.
Due to the coarse structure of the door mat, we used a lens with long focal length to compensate the unevenness of the material.
Make your own design or import our template.
Send the job to the laser using the driver settings below.
Process mode | Resolution | Cut line |
---|---|---|
Standard | 333 dpi | none |
Halftone | Others |
---|---|
Color | - |
Since a door mat is typically viewed from the distance, you can use a lower resolution which reduces the production time.
Put the door mat into your Trotec laser. Make the parameter settings. The recommended settings can differ depending on the laser machine used and laser power available.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | Engrave CO2 | 80 | 100 | 500 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | ON | 4mm | - |
Since a door mat is typically viewed from the distance, a resolution of 333 dpi is sufficient.