Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
There are some materials you should not engrave or cut with a laser becuase of their chemical make-up. Processing these materials creates dangerous gases or dust. These materials include:
Care should be taken with the following materials:
Be especially careful when processing "flame-retardant" materials because they often include of bromine. For flame-retardant materials, it is best to ask the manufacturer about the exact ingredients.
If the aforementioned materials are laser engraved or laser cut, dusts or gases may be produced that endanger the laser user or the functionality of the laser machine. For this reason, we do not recommend using these materials.
Are you unsure whether a particular material is suitable for laser cutting or laser engraving? Contact us, we would be happy to advise you.