Подставка для бутылок из TroGlass XT с печатью
Создайте оригинальную подставку для бутылок из TroGlass XT. Экструдированный акрил имеет постоянную толщину материала и поэтому подходит для проектов, где нужно соединять разные части.
Подготовка
Used material
- 3mm TroGlass XT
Machine used
- Speedy 360
- 80 watts
- 2" lens
- white acrylic gutting grid
This sample can be made with the Speedy 300 and Speedy 400 laser engraver with the JobControl® Vision software.
Copyright notice:
This template may not be used for products for resale or other distribution. If you intend to do so, you must purchase your own iStock license "Pineapple" and "Pineapple pieces". We assume no liability for illegal actions.
Пошаговые инструкции
Step 1: Import graphic files and print
Import our template and adapt it to your requirements. We print the design to the back of the acrylic with an UV-printer. With the registration marks the JobControl Vision camera system will recognize the position and cut precisely along the contour.
Step 2: Design acrylic
Import our template and adapt it to your requirements. Before drawing the final connections measure the kerf. For this make a test cut with a suitable parameter and lens. TroGlass XT comes with a consistent material thickness. Hence you can transfer the testing results to all future designs when using the same laser settings.
Send the job to the laser using the driver settings below.
Print settings:
Process mode | Resolution | Cut line |
---|---|---|
Vector Job | 500dpi | none |
Halftone | Others |
---|---|
- | Optimized Geometries, inner geometries first |

Step 3: Laser process
The laser parameters may vary depending on the type of laser machine and available laser power.
Laser parameters:
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
red | Cut CO2 | 70 | 0,4 | 15.000 |
Passes | Air Assist | z-Offset | Direction | Advanced |
---|---|---|---|---|
1 | ON | - | - | - |

Step 4: Assembly
Assemble the individual parts and add the product you want to promote.
Подготовка
Используемый материал
Используемый лазерный станок
- Speedy 360, 80 Вт
- 2" линза
- белый акриловый стол-решетка для резки
Это изделие можно изготовить на лазерном станке Speedy 300 и Speedy 400 с функцией JobControl® Vision.
Пошаговые инструкции
Шаг 1: импорт графических файлов и печать
Импортируйте наш шаблон и адаптируйте его к вашим требованиям. Мы печатаем дизайн на обратной стороне акрила с помощью УФ-принтера. С помощью регистрационных меток система JobControl Vision распознает положение и точно режет по контуру.
Шаг 2: создание дизайна
Импортируйте наш шаблон и адаптируйте его к вашим требованиям. Отправьте задание на лазерный станок, используя приведенные ниже настройки драйвера.
Настройки печати:
Process mode/Процесс обработки | Resolution/Разрешение | Cut line/Линия реза |
---|---|---|
Vector Job/Векторное задание | 500dpi | none/нет |
Halftone/Полутон | Others/Другие |
---|---|
- | Optimized Geometries, inner geometries first/Оптимизированная геометрия, сначала внутренняя геометрия |

Шаг 3: лазерная обработка
Параметры для лазерного станка могут варьироваться в зависимости от типа лазерной машины и доступной мощности лазера.
Параметры для лазерного станка:
Color/Цвет | Process/Процесс | Power/Мощность (%) | Speed/Скорость (%) | ppi/Hz |
---|---|---|---|---|
red/красный | Cut/Резка CO2 | 70 | 0,4 | 15.000 |
Passes/Проход | Air Assist/Система поддува | z-Offset/z-смещение | Direction/Направление | Advanced/Расширенные |
---|---|---|---|---|
1 | ON/ВКЛ | - | - | - |

Шаг 4: сборка
Соберите отдельные детали и добавьте продукт на дисплей.

Why should I use TroGlass XT?
TroGlass XT is that product, that all model makers, interior and exterior designers, and signage and display manufacturers are waiting for.
It's a transparent, extruded acrylic glass with fantastic light transmission, excellent resistance to outdoor weathering, and low thickness tolerance.