Digital Table Exhaust

Digital Table Exhaust for SP2000 and SP3000

In order to achieve the highest cut quality, the best possible vacuum is required in laser processing. The Table Exhaust takes care of this. With the SP3000 and SP2000 laser cutters, it is possible to activate the exhaust system only in specific zones of the work area. 

With material that does not cover the entire work area, the open areas usually need to be covered manually for an efficient vacuum. This costs time and money in preparing the work. Thanks to the segmented exhaust system, the work area can be divided into four zones with the SP3000 and two zones with the SP2000. The segments can be individually activated by pressing a button on the operating console. 
If the material to be cut covers only one segment, only this segment must be activated. It is no longer necessary to manually cover the surface. Thus, you achieve a perfect vacuum and the highest cut quality.

Digital Table Exhaust for SP4000

A well-thought-out exhaust system is the key for a clean and smooth cutting edge. The design of the SP4000 ensures the best extraction of dusts and gases. At the same time, the material is held down by vacuum to the laser bed to ensure process stability. The digital table exhaust can be segmented into four zones. This enables a perfect adaptation of the exhaust area to the fabric width and ensures a reliable cut even with narrow panels. In addition to that, Trotec developed a travelling exhaust at the laser head especially for soft signage applications. It ensures efficient removal of smoke at its origin. The operator is protected and legal regulations are fulfilled – even at highest cutting speeds.

SP series
Comprehensive solution for cutting large-format materials.

Discover large-format laser cutting machine

Questions about features and options?
We're happy to help.

Contact us
Proud member of troGROUP Logo