Getting started with a ProMarker marking laser

Getting started with a ProMarker laser

This tutorial shows you the basics on getting started with the ProMarker marking laser. It will cover the steps such as how to switch on the laser rack and check the warning lights. Use this quick start guide for troubleshooting assistance, to answer procedural questions, and as a handy reference for less experienced laser users.


Laser marking with DirectMark - as simple as printing

Laser marking with a ProMarker is as simple as printing. The supplied and already pre-installed laser software DirectMark operates like a printer driver. You process your graphics in your known graphics program (e.g. CorelDraw in this tutorial), and send the desired data file to the laser via a print command. In this manual you will learn how to handle this simple marking task:

  • Switch on the laser
  • Select the printer driver DirectMark
  • Make the necessary settings (among others laser parameters)
  • Adjust the laser focus (different possibilities)
  • Position the component (pilot laser)
  • Start the laser job.

Now you have successfully personalized your product.


Helpful guide in operation

This tutorial is a time-saving guide for companies with multiple, changing operators. The purpose is to enable employees who only occasionally work with the laser, as well as newly employed personnel, to operate the marking laser within a very short time so you can keep production running.

Download Tutorial: DirectMark Tutorial 1 - Quick Start Guide