Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
For large quantities, you can increase your productivity by 40% by using a larger laser workstation and trays.
Want to mark several parts in one operation to save time? Trays are very useful tools for that purpose. Depending on the batch size and required marking time, you can also use larger laser workstations. This allows you to mark more components in one operation and maximize output. Thus time-consuming handling through loading and removal is reduced. Here is a time comparison when using a SpeedMarker 700 and SpeedMarker 1300.
In our example, we engrave this metal bracket with a SpeedMarker 700 and a tray for 3 pieces. In comparison to that, we engrave 24 pieces in a SpeedMarker 1300 with a tray with the same laser parameters. Projected to 240 pieces, this results in a productivity increase of 16 minutes or 40%.
Time calculation SpeedMarker 700 | |
---|---|
Piece/workpiece carrier | 3 |
Laser time/piece | 5.25 seconds |
Opening and closing time | 4 seconds |
Traverse axes | 0 seconds |
Loading and unloading/workpiece carrier | 10 seconds |
Time/workpiece carrier | 29.75 seconds |
Repetitions | 80 |
Time/240 pieces | 39 mins 40 seconds |
Time calculation SpeedMarker 1300 | |
---|---|
Piece/workpiece carrier | 24 |
Laser time/piece | 5.25 seconds |
Opening and closing time | 4 seconds |
Traverse axes | 2 seconds |
Loading and unloading/workpiece carrier | 10 seconds |
Time/workpiece carrier | 142 seconds |
Repetitions | 10 |
Time/240 pieces | 23 mins 40 seconds |
The laser time, the opening and closing of the door in automatic mode and the loading and unloading of the workpiece carrier take the same amount of time with both laser machines. With the SpeedMarker 1300, the axes move to take advantage of the entire working space. This takes a total of 2 seconds per workpiece carrier. The deciding factor is the necessary repetitions. While the loading and unloading as well as the opening and closing of the door only takes place 10x with the SpeedMarker 1300, this process repeats a total of 80x on the SpeedMarker 700. Thus time-consuming handling can be significantly reduced by using a larger workstation with large trays.
Learn how to easily make the right template for your workpieces with a Speedy laser engraver.
Our SpeedMarker marking lasers are designed to meet industrial marking requirements in the most effective and efficient way. Thanks to high-speed galvo lasers, you can mark components within seconds. The laser systems are available in various sizes and configurations, allowing you to find the best possible solution for customer-specific marking tasks.