Felt and Leather
Christmas Stocking

Step by step guide

laser engraving felt

There are numerous creative laser ideas for the Advent season. Surprise your loved ones with a laser cut leather and felt Christmas stocking filled with Christmas goodies.


Required material
  • red polyesterfelt, approx 4mm
  • white Alcantara leather
  • green wool, approx. 2 mm thick
Used Trotec Laser

We recommend the use of 100% polyester felt as it is especially suited for processing with the laser.



Download now
Christmas Felt Boot


Download now

Step by Step

Step 1

Step 1:

Open the file "Christmas boot" and send it to the laser. The stocking is made from two different materials. We started with the red stocking. The red felt is engraved and cut.


  • Engraving (black) - Power: 20 %, speed: 50 %, resolution: 500 ppi
  • Cutting (red) - Power: 65 %,  speed: 3 %, resolution: 1000 Hz

The parameters may vary, depending on the machine you're using and the available laser power; they might therefore vary.

Step 2

Step 2:

Next, we laser cut the brim of the stocking.


  • Cutting (red) - Power: 65 %,  speed: 3 %, resolution: 1000 Hz.

The parameters depend on the used machine and the available laser power; they might therefore vary.

Step 3

Step 3:

Now all you need is a thick wool thread to stitch the different parts together.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Request more
information now.

Proud Member of troGROUP Logo