Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Available for:
SpeedMarker 300
SpeedMarker 700
SpeedMarker 1300
With autostart function you can regulate the laser machine that it starts automatically the lasermarking process. This function works either with closing the housing (SpeedMarker 300) or with pressing the autostart button (SpeedMarker 700 and SpeedMarker 1300). This saves time and also money in your daily work.
Many identical jobs can be done much faster when using the autostart function. If you have to lasermark for example 20 identical type plates (serial number and barcodes can for sure be continuing), you can program this within SpeedMark software. Then the operator only has to load the dataplate and press the "Start" button. After finishing the job, the door opens automatically and the next plate can be changed and reloaded, then the next laser job starts with pressing the button again.