Air Assist
Each material reacts differently to a laser process. During laser engraving and laser cutting, the supply of compressed air can significantly influence and improve the results.
More details
Laserati DT Laser for Producing Stamps
The optimal laser machine for rubber stamp engraving
Designed for rubber stamp engraving
The Trotec Laserati is a powerful, specialized CO2 laser engraving machine developed specifically for rubber stamp engraving. This powerful laser engraver processes up to 4 DIN A4 laser rubber plates, which are are clamped on a roller and secured by a vacuum. This laser engraving machine's specialized design enables it to engrave an A4 laser rubber page in approximately 20 minutes (with an engraving depth of 1.1 mm), producing high-quality engraving with virtually no wear and tear.
The benefits of the Laserati laser engraver
- minimal ongoing maintenance
- increased production efficienc
- maximum quality
The Laserati DT is the ideal laser machine for engraving rubber stamps.
Technical Data
| Dimensions | 1420 x 850 x 1420 mm / 56" x 34" x 56" |
| Working area: | 840 x 300 mm / 33,1" x 11,7" |
| Mechanical design: | fully closed housing with duplicate safety system, laser safety class 2, drives with brushless servo motors (maintenance free) |
| Construction: | Robust unit (105 W – approx. 300 kg), drum with vacuum function, laser pointer (standard) |
| Laser type: | Sealed-off CO2 laser |
| Available laser power: | 105-220 Watt |
| Electrical connection: | single phase 230V/ 50-60 Hz |
