Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Engraving and marking a wrist watch with a Speedy flexx
We show you how you can laser engrave and mark materials in one step.
This sample can be produced with any machine from the flexx laser engraver series.
Import our template or create your own design. Adapt the design so to the shape of the watch. Measure the height difference between the materials. This figure is required for the z-offset (for the watch we used there is no height difference between metal and leather). Why this step is so important and other helpful hints about how to use flexx technology is explained here.
Send the job to the laser using the following printer driver settings:
Process mode | Resolution | Cut line | Halftone | Others |
---|---|---|---|---|
Standard | 1000 dpi | none | Color | - |
It is easier to position/adjust the design, if you send the graphic elements for housing and wristband separately. By doing this you can position the graphics precisely with the help of the laser pointer.
Make the parameter settings. The parameters can differ depending on the laser machine used and laser power available.
Important: When engraving a flexx job, always focus on the metal resp. on the material that shall be processed with the fiber laser.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Black | Engraving FLP | 85 | 3 | 30000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | +2 mm | - |
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Red | Engraving CO2 | 15 | 15 | 1000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | - | - |
No post-processing is necessary. Due to the annealing process, the metal surface is not damaged which makes the watch comfortable to wear.