Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
In this tutorial, we show you how you can upgrade stainless steel cutlery using a laser. The annealing process keeps the surface intact and the pieces can be cleaned easily.
You can use any other machine of the Speedy Flexx laser engraver series.
If you position the material into the machine, make sure that the surface is as flat as possible (parallel to the table)
Import our template or create your own design. Send the job to the laser using the following printer driver settings.
Process mode | Resolution | Cut line |
---|---|---|
Standard | 1000 dpi | none |
Halftone | Others |
---|---|
color | - |
Determine and set the parameters. The parameters can differ depending on the laser machine used and laser power available.
we used Lego bricks. They are incredibly practical if you have to compensate different heights or define exact positions. Especially when the production of a template does not make sense
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | Engraving FLP | 90 | 3 | 30000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | +2 mm | - |