Speedy series: laser engraving and cutting machines for formats up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Create a moveable globe as design element or fancy detail for other applications. Below are instructions and template download for your laser.
For this sample you only can use any laser machine from the Speedy laser engraver series.
Import our graphic. Add your design to the base plate or the outer ring.
Send the job to the laser using the settings below.
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
Color | Optimized geometries, inner geometries first |
Define the necessary parameters. They might vary depending on the machine used and the available laser power.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
red | Cut CO2 | 40 | 0.2 | 5000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | - | - |
We used the standard parameters for TroGlass optimized for quality.
To assemble the globe, start with the ring that has four outside notches (1) and put it carefully into the ring with the two inner and two outer notches (2). Then put the ball into the ring that has two long connectors (3). Now put one of the two small rings (4) onto the outer ring (5). Then you insert the preassembled globe into the holder and fix it on the opposite side using the second ring (4). Finally, insert the globe into the stand (6).