--------------------------

Bouquet of flowers from TroGlass for Mother's Day

Preparation

Required material
  • TroGlass Clear 5mm
  • TroGlass 3mm in different colors for leaves, flowers and vase with self adhesive tape
  • Aluminium Tag Heart
Machine used:
  • Speedy 400
  • 100 watts
  • 2" lens
  • Aluminum Cutting Grid Table or Acrylic Gutting Grid
This sample can also be made on any machine from the Speedy series.
mothers_day.zip

ZIP

Download now

Step by step

Step 1

Design

Import our template and adapt it to your requirements.

For the perfect fit, check the contour of the aluminum tag before cutting the vase.

With "Create job" move the design to the "Prepare" screen. 

Step 2

Laser process

Place the jobs for the different materials to the desired position and adapt the settings.
The laser parameters may vary depending on the type of laser machine and available laser power.
Send the job to the "Queue" for Laser processing.

Tip: For an even better finish engrave the TroGlass Clear sheet from the back.

Inner geometries first: On
Skip overlapping cut lines: On

Metal Anodized Aluminium

Effect Engrave Quality
Process Engrave
Layers black
Power (%) 30
Speed (%) 50
DPI 500
Source CO2
Air Assist On
Z-offset -
Passes 1
Power Correction 10
Direction Bottom up
Dithering None
Engraving Mode Standard
High Quality

Acryl TroGlass Clear

Effect Engrave Quality
Process Engrave
Layers black
Power (%) 12
Speed (%) 20
DPI 500
Source CO2
Air Assist On
Z-offset 1
Passes 1
Power Correction 10
Direction Bottom up
Dithering None
Engraving Mode Standard
High Quality
Effect Cut quality
Process Cut
Layers red
Power (%) 60
Speed (%) 0,2
Hz 20000
Source CO2
Air Assist On
Z-offset -1,5
Passes 1
Power Correction 10
Path Planning Accuracy

TroGlass

Effect Engrave Quality
Process Engrave
Layers black
Power (%) 23
Speed (%) 50
DPI 500
Source CO2
Air Assist On
Z-offset 1
Passes 1
Power Correction 10
Direction Bottom up
Dithering None
Engraving Mode Standard
High Quality
Effect Cut quality
Process Cut
Layers red
Power (%) 40
Speed (%) 0,2
Hz 5000
Source CO2
Air Assist On
Z-offset 0
Passes 1
Power Correction 10
Path Planning Standard
Step 3

Finishing

Glue the pieces together. Start with the flowers and attach them to the green acrylic. Then a glue the green and after that the brown acrylic to the front side of the TroGlass Clear. At last place it in the foot part.
The Aluminum tag fits over the engaving on the bottom part, and will be partially held by the brown acrylic.

Inspiration

For this application you can also use different colors or materials. Let your creativity run free.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo