acrylic pendant laser cutting

Lasermade Jewelry
Necklace with Laser-Cut Pendant

This pendant is made of 13 laser-cut and engraved pieces. The exact correction of the cutting gaps guarantees a firm hold without glue and the engraving elements allow countless designs.

Have a go at creating this unique necklace charm, made from our high-quality TroLase material. The precision of the cutting gaps guarantees a firm hold, meaning no glue is necessary!


Required material
Trotec laser machine used

Use a honeycomb cutting table or an acrylic cutting grid table to avoid back reflections



Download now

Step by step

assembly instruction for pendant
Step 1

Step 1: Design

Import our template or, alternatively, create your own unique design. Send the design to the laser machine.

Do you want to use a different material?

If you wish to use other materials, you may need to adapt parameters and geometries. The cutting gap has been optimised for TroLase Reverse 1.6mm.

pendant made from acylic
Step 2

Step 2: Laser Parameters

We've sent the graphics to the laser machine with 600 dpi and used the following parameters.

Laser Settings:

Engraving: Power: 100% - Speed: 60% - Frequency: 1000 ppi - Air Assist: Ein - Z-Offset: 2.5mm
Cutting: Power: 50% - Speed: 0.6% - Frequency: 2000 Hz - Air Asisst: On

Additionally we activated the optimised geometries-function to achieve an even higher quality.

engraved pendant
Step 3

Step 3: Cleaning and assembling

Clean the lasercut pieces with a soft cloth and remove the dust. Then proceed with assembling the pendant by fitting the individual pieces together.


To cut the stand, you can also use our template.

acrylic pendant laser cutting
Step 4

Step 4: Attach the ribbon

In order to assemble the pendant, take the small disk with the hole, pull the ribbon through and fix with a knot. Cut the overhanging ends short with scissors. In the pictures below we have removed the ribbon, so you can see the assembly better.

assembly instruction for pendant
Step 5

Step 5: First side part

Now connect one side part of the disc.

assembly instruction for pendant
Step 6

Step 6: Insert discs

Attach all other disks to the side part, paying close attention to the order.

engraved pendant
Step 7

Step 7: Other side parts

Finally, insert the remaining side parts around the pendant. Your masterpiece is now ready to be showcased!

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo