Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
with detail sharpness, high contrasts and deep engraving.
The legibility of even the smallest font sizes is still ensured, by precise lettering. The high detailed sharpness, high contrasts and deep engraving, prove the demanding marking quality. For deeper engraving, there is a special engraving model which leads to clean burns - without any post-processing.
Thanks to the MOPA laser source, high-contrast markings on plastics can also be carried out even more precisely. MOPA lasers can also be used to apply annealing markings on anodised aluminium, as well as (under defined conditions) colour markings on stainless steel and precise metal engravings on the entire marking area.
High-quality optics are used as standard for perfect marking results.